Flameless Electric Air Heaters

Heater Style Application & Selection Guide

Style 001

Smallest	As small as 0.410” OD x 5-1/4” long
Lowest Cost	Contact your Distributor or Factory
Nozzle Available	0.065” diameter outlet opening for soldering and other small target applications
Lowest Flow	25 to 400 SCFH air flow range
Lowest Wattage	465 watts @ 120 volts and can be adjusted lower

Go to Style 001 Pages:

Style 002

Accessories for Style 001 Heaters, Shields, Thermocouples, Replacement Quartz

Go to Style 002 Pages:

Accessories

Style 003

Most Efficient	Triple pass heat exchanger pre-heats air before passing through element
Choice of Wattages	2000 to 6000 watts @ 240 volts
Replaceable Element	Plug-in socket connection allows quick replacement
Physical Strength	Sturdy stainless steel housing with protective outlet screen
Cool Outer Shell	User friendly because heat exchanger feature keeps outer shell cool to the touch
Medium to High Air Flow	150 SCFH to 1500 SCFH

Go to Style 003 Pages:

Style 004

Accessories for Style 004 Heaters, Pressure Switch, Relay, Thermocouple Attachments

Go to Style 004 Pages:

Accessories

Style 005

Modular Construction	Select size and wattage combinations to suit application
No Back Pressure	Elements are mounted 90 degrees to air flow resulting in minimal back pressure so that a fan can be used for the air source
Highest Air Flow	Limited only by combination of heater duct sizes

Go to Style 005 Pages:

Open Coil Convection Heaters

Style 006

Power/Temperature Controls - manual and automatic

Go to Style 006 Pages:

Style 007

In-Line Applications	NPT pipe threads at inlet and outlet
Highest Pressure Construction	Feed-thru style rated to 150 PSI

Go to Style 007 Pages:

In-Line Pipe Heaters

Application Guide

Packaging:

Poly-coated paperboard sealing (cups, composite cans, etc.)	Styles 001 or 003
Adhesive curing (tri-seal cartons, etc.)	Styles 001 or 003
Heat shrinking (bulk packaging, etc.)	Styles 001, 003 or 005

Automotive:

Bonding of components (side trim molding, etc.)	Style 003
Exhaust testing	Styles 003, 005 or 007

Plastics and Rubber:

Salt removal from rubber extrusions	Style 003
Deflashing molded parts	Styles 001 or 003
Staking, forming and bending of plastics	Styles 001 or 003
Plastic welding	Styles 001 or 003

Textiles:

Cutting and welding

Styles 001 or 003

Soldering:

Soldering and desoldering operations

Styles 001, 003 or 005

Semiconductor and Electronics:

Soldering and desoldering (boards, lead frame and components)	Styles 001 or 003
Solder repair stations	Styles 001 or 003
Epoxy curing (conductive and non-conductive)	Styles 001 or 003
Heat shrink tubing	Styles 001 or 003
Wafer drying	Styles 001
Process gas heating	Styles 003 or 007

Printing and Paper:

Ink drying	Styles 001 or 003
Adhesive activation	Styles 001, 003 or 005
Coated paper drying	Styles 003 or 005

Flameless Electric Air Heaters

Heater Style Application & Selection Guide

Style 001

Go to Style 001 Pages:

Style 002

Go to Style 002 Pages:

Style 003

Go to Style 003 Pages:

Style 004

Go to Style 004 Pages:

Style 005

Go to Style 005 Pages:

Style 006

Go to Style 006 Pages:

Style 007

Go to Style 007 Pages:

Standard Flow Rate (SCFM) Calculator

Power Flowrate Calculator

Temperature Conversion

Ohms Law Calculator

Pressure Conversion

Three Phase Unit Calculator

Single Phase Unit Calculator

Parallel Resistance Calculator

Series Resistance Calculator