Calculate the SCFM.
Standard
The Style 007 Fluid Heater uses the same element configuration as the Styles 001 and 003, but in a stainless steel pipe. This construction is suited to in-line applications where pipe threads are required at both inlet and outlet ends.
Electrical terminations are offered in the form of lead wires and as feedthrus rated up to 150 psi. These heaters can be used to heat substances other than air, as long as the fluid is non-conductive and does not chemically react with 300 series stainless steel, silver solder, nickel, aluminum oxide, or the epoxy potting material used on the leaded model.
This product must be properly grounded and fused.
3/8” Pipe
Part # 007-10133
Terminations - Feedthrus
Rating - 800W 120V
Part # 007-10134
Terminations - Leads
Rating - 800W 120V