Flameless Electric Air Heaters

In-Line Pipe Heaters

The Style 007 Fluid Heater uses the same element configuration as the Styles 001 and 003 but in a stainless steel pipe. This construction is suited to in-line applications where pipe threads are required at both inlet and outlet ends. Electrical terminations are offered in the form of lead wires and as feedthrus rated up to 150 psi. These heaters can be used to heat substances other than air as long as the fluid is non-conductive and does not chemically react with 300 series stainless steel, silver solder, nickel, aluminum oxide or the epoxy potting material used on the leaded model. This product must be properly grounded and fused.

Performance Characteristics:

Heating Air
Select the heater that matches your application

3/8” Pipe

Part # 007-10133

Terminations - Feedthrus
Rating - 800W 120V

In-Line Pipe Heaters Part # 007-10133In-Line Pipe Heaters Part # 007-10133

Part # 007-10134

Terminations - Leads
Rating - 800W 120V

In-Line Pipe Heaters Part # 007-10134In-Line Pipe Heaters Part # 007-10134
In-Line Pipe Heaters Part # 007-10134In-Line Pipe Heaters Part # 007-10134

½” Pipe

Part # 007-10135

Terminations - Feedthrus
Rating - 4000W 220V

In-Line Pipe HeatersIn-Line Pipe Heaters

Part # 007-10136

Terminations - Leads
Rating - 4000W 220V

In-Line Pipe HeatersIn-Line Pipe Heaters
In-Line Pipe HeatersIn-Line Pipe Heaters

1 ¼” Pipe

Part # 007-10137

Terminations - Feedthrus
Rating - 6000W 220V

In-Line Pipe HeatersIn-Line Pipe Heaters

Part # 007-10138

Terminations - Leads
Rating - 6000W 220V

In-Line Pipe HeatersIn-Line Pipe Heaters
In-Line Pipe HeatersIn-Line Pipe Heaters

Performance
Characteristics:
Heating Air
Select the heater that matches your application

3/8” Pipe

Part # 007-10133
Terminations - Feedthrus
Rating - 800W 120V

Part # 007-10134
Terminations - Leads
Rating - 800W 120V

1/2” Pipe

Part # 007-10135
Terminations - Feedthrus
Rating - 4000W 220V

Part # 007-10136
Terminations - Leads
Rating - 4000W 220V

1 1/4 ” Pipe

Part # 007-10137
Terminations - Feedthrus
Rating - 6000W 220V

Part # 007-10138
Terminations - Leads
Rating - 6000W 220V

  • Calculator
  • Standard Flow Rate (SCFM) Calculator

    Calculate the SCFM.

    Power Flowrate Calculator

    Calculate the electrical power, flow rate or temperature requirement.

    Temperature Conversion

    Fill in one value to calculate the other.

    Ohms Law Calculator

    Fill in two values to find the other two.

    Pressure Conversion

    Fill in one value to calculate the other.

    Three Phase Unit Calculator

    Fill in two values to find the 3rd.

    Single Phase Unit Calculator

    Fill in two values to find the 3rd.

    Parallel Resistance Calculator

    Calculate the total resistance in ohms of resistors that are in parallel by entering the value of each below.

    Series Resistance Calculator

    Calculate the resistance in ohms of resistors connected in series by entering the value of each.

    Copyright © 2022 Convectronics. All Rights Reserved.