Temperature Sensors

Standard Applications Product Configurator

Standard Applications ThermocouplesStandard Applications Thermocouples
Ceramic
Bead DIA.
Wire
AWG
ANSI
Type
Part Number
1/8 24 J
K
T
E
(R/S)*
TAW2-12.0E
3/16 20 TAW3-12.0E
1/4 14 TAW4-12.0E
3/8 8 TAW6-12.0E

HOW TO ORDER:


EXAMPLE:

To order an 18” long - 20 AWG wire - ANSI type “K” element, the part number is:


Standard Applications ThermocouplesStandard Applications Thermocouples
Wire AWG ANSI Type Part Number
8 J
K
T
E
(R/S)*
TAZA-12.0E
14 TAZB-12.0E
16 TAZC-12.0E
20 TAZD-12.0E
24 TAZE-12.0E

* Standard gauge wire to be used on noble metal thermocouples (R/S): 24 AWG.
* Standard ceramic insulators for noble metal thermocouples is high purity alumina oxide.
* Other types of ceramic insulators are available - consult factory.
* Multiple junction units available - consult factory.

HOW TO ORDER:


EXAMPLE:

To order a 20” long - 8 AWG wire - ANSI type “J” element, the part number is:


Standard Applications ThermocouplesStandard Applications Thermocouples
Spade Lug Size ANSI Type Part Number
No.10*
Spade Lug
Standard
J
K
T
E
TAQ3-24.0

HOW TO ORDER:


EXAMPLE:

To order a Spade Lug Thermocouple with standard #10 spade lug, ANSI Type “K”, the part number is:


Standard Applications ThermocouplesStandard Applications Thermocouples
Wire AWG ANSI Type Part Number
20 J
K
T
E
TAS-24.0EA
24 TAS-24.0EB
30 TAS-24.0EC
36 TAS-24.0ED

* When ordering, specify part number and quantity; if flexible lead length is other than 24”,
specify accordingly and adjust base price.
* All types of Thermocouple wire insulations and gauge sizes are available - consult factory.
* All types of metal overbraid or flexible armor are available - consult factory.
* Other styles of termination are available.

HOW TO ORDER:


EXAMPLE:

To order an Exposed Bead Welded Thermocouple ANSI type “K”, 24” long with 20 gauge wire, the part number is:


Standard Applications ThermocouplesStandard Applications Thermocouples
Hose Clamp Size ANSI
Type
Junction
Type
Part
Number
1-12” J
K
T
E
G = Grounded

TBC-72.0G

CONVECTRONICS’ Pipe Probe is designed for use in applications where Heat and Water Pipes, Band Heaters or Round products require surface temperature measurements. Having an adjustable Stainless Steel Hose Clamp allows this unit to be used extensively over a large range of sizes.

HOW TO ORDER:


Standard Applications ThermocouplesStandard Applications Thermocouples
Hose Clamp Size Sheath Material ANSI
Type
Junction
Type
Part
Number
1/8

316 ST. STEEL

J
K
T
E
G = Grounded TBA2-06.0G
3/16 TBB3-06.0G

CONVECTRONICS’ Sabre Thermocouple has been specifically designed for use in the food industries. The all-stainless steel construction with teflon insulated extension leads is completely autoclavable. Having a pointed tip this assembly lends itself to applications where semi-frozen, hard or raw foodstuffs must be penetrated for exact temperature readouts during preparation stages.

HOW TO ORDER:

  • Calculator
  • Standard Flow Rate (SCFM) Calculator

    Calculate the SCFM.

    Power Flowrate Calculator

    Calculate the electrical power, flow rate or temperature requirement.

    Temperature Conversion

    Fill in one value to calculate the other.

    Ohms Law Calculator

    Fill in two values to find the other two.

    Pressure Conversion

    Fill in one value to calculate the other.

    Three Phase Unit Calculator

    Fill in two values to find the 3rd.

    Single Phase Unit Calculator

    Fill in two values to find the 3rd.

    Parallel Resistance Calculator

    Calculate the total resistance in ohms of resistors that are in parallel by entering the value of each below.

    Series Resistance Calculator

    Calculate the resistance in ohms of resistors connected in series by entering the value of each.

    Copyright © 2022 Convectronics. All Rights Reserved.