Temperature Sensors

Refractory / Noble Metal Thermocouples Product Configurator

High Temperature Thermocouple ProbesHigh Temperature Thermocouple Probes
Sheath
Size Dia.
Sheath
Material
ANSI
Type
Junction
Type
Part Number STD Length (in.) Sheath
1/8 MOLYBDENUM
(MO)
B, C, R, S, F, G Ungrounded TAK2-12.05 12
3/16 TAK3-12.05 12
1/4 TAK4-12.05 12
3/8 TAK5-12.05 12
 
1/8 TANTALUM
(TA)
B, C, R, S, F, G Ungrounded TAK2-12.06 12
3/16 TAK3-12.06 12
1/4 TAK4-12.06 12
3/8 TAK5-12.06 12
 
1/8 ALUMINIA
(AL2O3)
B, C, R, S, F, G Ungrounded TAK2-12.08 12
3/16 TAK3-12.08 12
1/4 TAK4-12.08 12
3/8 TAK5-12.08 12
 
1/4 ZIRCONIA
(ZRO2)
B, C, R, S, F, G Ungrounded TAK4-12.07 12
3/8 TAK5-12.07 12
 
1/4 QUARTZ
(QR)
B, C, R, S, F, G Ungrounded TAK4-12.09 12
3/8 TAK5-12.09 12

HOW TO ORDER:

High Temperature Thermocouple ProbesHigh Temperature Thermocouple Probes

EXAMPLE:

To order a 12” long 1/8” Diameter MOLYBDENUM Sheath, ANSI Type “C”, the part number is:

High Temperature Thermocouple ProbesHigh Temperature Thermocouple Probes

* Maximum service temperatures not to exceed 1500°C.
* For higher service temperatures consult factory.
* The standard thermocouple is available with a thick wall metal support tube (4” long standard) attached to the connector end. The support tube is 1/8 larger in diameter than the sheath diameter. The support tube is used to eliminate any damage to the refractory sheath that may be caused by a mounting bushing.

* If a support tube is desired, insert suffix (ST) to the part number
* When ordering, specify part number and quantity. If sheath length is other than 12”, specify accordingly and adjust base price.
* Other style termination available.
* Multiple junction units are available - consult factory.

  • Calculator
  • Standard Flow Rate (SCFM) Calculator

    Calculate the SCFM.

    Power Flowrate Calculator

    Calculate the electrical power, flow rate or temperature requirement.

    Temperature Conversion

    Fill in one value to calculate the other.

    Ohms Law Calculator

    Fill in two values to find the other two.

    Pressure Conversion

    Fill in one value to calculate the other.

    Three Phase Unit Calculator

    Fill in two values to find the 3rd.

    Single Phase Unit Calculator

    Fill in two values to find the 3rd.

    Parallel Resistance Calculator

    Calculate the total resistance in ohms of resistors that are in parallel by entering the value of each below.

    Series Resistance Calculator

    Calculate the resistance in ohms of resistors connected in series by entering the value of each.

    Copyright © 2022 Convectronics. All Rights Reserved.