Calculate the SCFM.
Plastic Applications Thermocouples
The Plastic, Rubber and Packaging Industry sensors contained in the following pages are the most commonly used sensors in these three industries. The Thermocouple and RTD measuring elements all have insulated fiberglass leads inside the various sheath configurations. All are rated for use up to 900°F (J) maximum temperature. Some applications, because of higher temperature demands, physical abuse, grounding problems, or other problems particular to a given process, may require the use of a MgO insulated type of sensor construction. The process may also require a special construction type of sensor to solve a particular application problem.
Our team of engineers invite your inquires to solve your sensor application problems.
- Generally, plastics industry thermocouples are type J, and are enclosed in 304 Stainleess Steel sheaths that are 3/16” in diameter.
- Plastics industry sensors are not to be used in process applications above 900oF (700oF for type T), as their construction uses 900oF rated fiberglass insulated thermocouple wire inside the sheath.
- Use stranded conductor leadwire where continuous or frequent flexing of the leads occur.
- Ungrounded thermocouples are demanded in many applications due to EMF stray and instrument grounding requirements. Most plastic instrument sensors can be supplied with this option, but in some cases a MgO insulated type of thermocouple may be required.
- The use of sensors with short leads, used in conjunction with extensions connected to permanent instrument connected junction boxes of jack panels, may be desirable in high sensor replacement applications. The cost of replacing long leads with each sensor replacement may not be cost effective.
- Our adjustable immersion AG3 and AH3 styles will replace almost all fixed bayonet style sensors as long as the lead length and cold end terminations are compatible with the sensors currently being used.
- RTD sensors usually are the DIN Standard with a .00385α temperature coefficient.
- Hot tip immersion with RTD sensors usually require a minimum immersion of 1 1/4” because of length of the RTD measuring element inside the sheath.