Plastic Applications Thermocouples Overview - Thermocouple, Temperature Sensor, RTD, Bayonet, Adjustable, Nozzle, Armor TC Convectronics Manufactures First Class Heaters, Temperature Sensors and Precise Controls, Assists with Design and Application Needs.


Constructing the Perfect Temperature Sensor
Thermocouple Types and Applications
Mineral Insulated TC's - Overview
Plastic Applications TC's - Overview
Bayonet TC's - Product Configurator
Adjustable Bayonet TC's - Product Configurator
Nozzle TC's - Product Configurator
Bolt Style TC's - Product Configurator
Surface Applications - Product Configurator
Moving Applications - Product Configurator
Standard TC's - Product Configurator
Refractory/Noble Metal TC's - Overview
RTD Information Overview
Thermocouple and Thermocouple Extension Wire
Mineral Insulated (MI) Cable
Terminations and Accessories

Temperature Sensors
Plastic Applications Thermocouples - Overview

The Plastic, Rubber and Packaging Industry sensors contained in the following pages are the most commonly used sensors in these three industries. The Thermocouple and RTD measuring elements all have insulated fiberglass leads inside the various sheath configurations. All are rated for use up to 900°F (J) maximum temperature. Some applications, because of higher temperature demands, physical abuse, grounding problems, or other problems particular to a given process, may require the use of a MgO insulated type of sensor construction. The process may also require a special construction type of sensor to solve a particular application problem.

Our team of engineers invite your inquires to solve your sensor application problems.
Helpful Hints
Generally, plastics industry thermocouples are type J, and are enclosed in 304 Stainleess Steel sheaths that are 3/16” in diameter.
Plastics industry sensors are not to be used in process applications above 900°F (700°F for type T), as their construction uses 900°F rated fiberglass insulated thermocouple wire inside the sheath.
Use stranded conductor leadwire where continuous or frequent flexing of the leads occur.
Ungrounded thermocouples are demanded in many applications due to EMF stray and instrument grounding requirements. Most plastic instrument sensors can be supplied with this option, but in some cases a MgO insulated type of thermocouple may be required.
The use of sensors with short leads, used in conjunction with extensions connected to permanent instrument connected junction boxes of jack panels, may be desirable in high sensor replacement applications. The cost of replacing long leads with each sensor replacement may not be cost effective.
Our adjustable immersion AG3 and AH3 styles will replace almost all fixed bayonet style sensors as long as the lead length and cold end terminations are compatible with the sensors currently being used.
RTD sensors usually are the DIN Standard with a .00385α temperature coefficient.
Hot tip immersion with RTD sensors usually require a minimum immersion of 1 1/4” because of length of the RTD measuring element inside the sheath.
Product Configurator
For Bayonet TCs
Product Configurator
For Adjustable Bayonet TCs
Product Configurator
For Nozzle TCs
Product Configurator
For Bolt Style TCs
Convectronics, Inc.   •   Ward Hill Industrial Park West, 111 Neck Road Haverhill, MA 01835 USA   •   978-374-7714
© Copyright 2022 - All rights reserved Network Applications by TactiCom, Inc.