Power Control Module - Power Controls, Power Control Module, Heat sinks Convectronics Manufactures First Class Heaters, Temperature Sensors and Precise Controls, Assists with Design and Application Needs.


High Temperature Air Heater Information
Heater Style Application and Selection Guide
Single Pass Quartz Tube Heaters
Metal Shell Air Heaters
Triple Pass Housings/Elements
Triple Pass Flanged Housings/Elements
Triple Pass Heaters: Three Element Housing
Open Coil Convection Heaters
In-line Pipe Heaters
High Volume In-line Pipe Heaters
Power Control Module
S.C.R. Power Controls
Contactors and Controllers

Flameless Electric Air Heaters
Power Control Module

Part # 006-10062
Click on image to enlarge
The Power Control Module offers infinitely variable phase control when used with resistive loads up to 25 amps. The solid state circuitry provides modified transient suppression, exceptional stability and life. An external potentiometer/switch (dial plate and knob included) is used to control output voltage. A trimming potentiometer is mounted on top of the module to adjust turn on voltage level. This device should be installed in a circuit fused at 120% rated load or 30 amps maximum.
Input voltage:   110-277 volts, single phase, 60 Hz.
Output voltage: Adjustable from 17% to 99% of applied voltage
Current rating:   25 amps maximum (see ambient temperature vs. current curve)
Power consumption:   (maximum): 50 watts
Maximum temp:   75°C Measured at center of base plate
Click on image to enlarge

Part Number # 006-10139
Heat Sink

Recommended for load
currents exceeding 15 amps
(see ambient temperature
vs. current curves shown above)

> Back to Top   Click on image to enlarge
Convectronics, Inc.   •   Ward Hill Industrial Park West, 111 Neck Road Haverhill, MA 01835 USA   •   978-374-7714
© Copyright 2022 - All rights reserved Network Applications by TactiCom, Inc.