HOME

Tubular Electric Heaters Mounting Methods Convectronics Manufactures First Class Heaters, Temperature Sensors and Precise Controls, Assists with Design and Application Needs.

HEATERS   SENSORS   CONTROLS

Tubular Electric Heaters
Mounting Methods
Heater Terminations
Tubular Electric Heater Forming
Radiant Process Heater Assembdtes
Quartz Radiant Infrared Heaters
spacer

Tubular Heater Products
Tubular Electric Heaters - Mounting Methods

 

 

 
Bushings
Sheath
Diameter
Bushing
Thread Size
Hex
Dimension
A
.250” 1/2-20 3/4 1"
.312” 1/2-20 3/4 1"
.375” 5/8-1/8 1 1"
.430” 3/4-16 1 1"

A threaded bushing is brazed or welded to the sheath to provide quick, rigid, liquid or air-tight mounting through tank walls, oven walls, etc.

• Available in Brass or Stainless Steel
• All bushings furnished with plated washer,
  compressed non-asbestos gasket and jam nut
• Hex head bushings are standard
• Specify location from end of sheath

 
 
 
 
 
 
 
 
    Click on image to enlarge
     
Locator Rings  
Locator rings are permanently attached to the heater sheath and are used to limit the movement of the heater while allowing for expansion and contraction of the heater sheath. When ordering, please specify the location from the end of the sheath.  
     
Mounting Brackets  
The 16 gauge stainless steel mounting bracket is an economical way to mount the heater in non-pressurized, non-liquid applications. Unless otherwise specified the brackets will be located 1/2” (13 mm) from the edge of the heater sheath.

 

 

    Click on image to enlarge
* All letter designated dimensions must be supplied by the customer.
 
> Back to Top    

 
Convectronics, Inc.   •   Ward Hill Industrial Park West, 111 Neck Road Haverhill, MA 01835 USA   •   978-374-7714
© Copyright 2016 - All rights reserved Network Applications by TactiCom, Inc.